Pressure Power Washer Pump 24mm Solid Shaft 3600 PSI 4.0 GPM 10 HP Belt Drive
Specifications:
- Match engine power: 9.9 HP
- Work pressure: ≤3600PSI/250Bar
- Flow rate: 13-15LPM/3.5-4.0GPM
- Power: Max 7.4KW (Require at least 5.5KW engine)
- Engine speed: 1450 RPM
- Solid shaft: 24 mm
- Pump plunger bore: 18 mm
- Inlet: 3/4” NH thread
- Outlet: 3/8” quick connect(19mm)
- Net Weight: 22 lbs
- Package included: 1xreplacement Pump,1xpressure guage,1xset of extra O-rings,2xinstalling rails-brackets,1xdetergent tube
- Certificate: CE, ISO9001, CCC
ATTENTION:
- 1. This Pump is ONLY for Engines with 24mm Solid shafts!
- 2. Install the unloader & pressure gauge onto the pump before use.
- 3. These pumps ship with oil, replace the oil inlet cap with a hole (in the package) before first use, then avoid pump damage. The original one on the pump is sealed in case of oil leakage in transit.
- 4. When installing, you can use the rails-brackets in the package or your existing frame rails(Both may need modification); Please allow water to flow freely through the pump until all air is out of the lines before firing the pressure washer up!
Features
- 3,600 psi at 4.0GPM(15LPM), 9.9 HP (Max 7.4 KW) at 1,450 rpm, 24 mm solid shaft, horizontal mount belt-drive, keyway, 3/4-inch standard garden hose inlet, 3/8-inch quick-connect outlet, 60°C (140°F) max. inlet water temperature
- Replacement pump kit with compatibility for belt-driven gas engine setups and hollow shaft electric motors made for 24 mm diameter shafts. These 24mm solid shaft pumps work with both gas-powered engines and electric-powered motors from brands like Canpump, Nicolini & C, Comet, Honda, Annovi Reverberi, RIDGID, Blackmax, Generac, Husky, Excell, Troy-Bilt, Sears, Briggs & Stratton, Campbell Hausfeld and more.
- Forged brass and anodized aluminum construction with cooling fins, for protection against corrosion; Durable 18 mm ceramic-coated solid stainless steel pistons deliver extended seal life; Dual oversized radial ball bearings are installed for better wear and friction resistance. Strengthened one-piece alloy aluminum connecting rod.
- Fully detachable and pressure-adjustable internal bypass unloader valve with ergonomic control, detergent injector, and built-in water filter; Triplex plunger pump mechanism; Thermal relief protection to prevent the pump overheating; Sight glass for oil inspection.
- Easy Installation: This replacement pump features a garden hose inlet and QC quick-connect high-pressure hose outlet. Each kit includes a detergent tube with filter, pressure gauge, mounting bolts, and installing rails-brackets to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation, and mounting dimension to ensure compatibility)