iMeshbean 1 HP 4" Deep Well Water Pump Submersible Stainless Steel 257FT 33GPM (220V 60Hz)
Features Technical Specifications:
- 4" deep well submersible pump, 1 HP, 230V, 5.1 Amps, 7 stages, 1-1/4" NPT discharge.
- Fits in a 4" well casing.
- Industrial grade heavy duty, also good for home usage impeller 7 stage design.
- The number of impellers is 8.
- 33 GPM max/257 ft head is comparable to 2HP pumps but uses less electricity.
- 257 feet max head is for open water tanks. Refer to the Pump Selection Guide for the pressure tank applications.
- impeller design provides extended pump life and heavy flow under the worse circumstances.
- This pump lasts much longer than the all-plastic-bottom-suction pump, which weighs half of this pump (same HP).
- Water temperature: (32 ~113 ℉ ) Trans medium's Ph: 6.5~ 8.5
- Shell, motor shafts are made with stainless steel to ensure corrosion resistance. High-quality sealed ball bearings guarantee its excellent performance.
- The hermetically sealed motor has a built-in capacitor start, and thermal protection to prevent overheating, for longer life and a powerful start.
- Built-in the control box. This pump DOES NOT require an external control box!
- This pump uses a high-quality and highly efficient approved motor and uses less energy
- This is a 2-wire pump with 3-Wire (2 wires + ground wire)
- A 10' long electric cord comes with this submersible deep well pump.
- Heavy-duty thermoplastic impellers, diffusers, and intake screens.
- This pump has a built-in check valve.
- Unique design reduces its noise.
- The installation user's manual and tape kit are included.
- Free technical support is available during your installation.
304 Stainless Steel
-
This stainless steel deep well pump features a built-in check valve and stainless steel material. As a result, our pump is highly corrosion-proof and rust-proof.
Powerful Motor
- Pure copper wire click, strong power, safe and durable1
- Copper wire coil,high Efficiency, better heat dissipation
High Precision Rotor
- Stable
- Energy-saving
- Long-life
- High Efficiency
High Lift & Large Flow Rate
- Upgraded Impeller
- High Pressure-resistant
33FT cord
- 33 FT Power Cord
- 2 wire pump with 3-Wire (2 wires + ground wire)
Coupling & Outlet
- Cast iron with electrophoretic paint.
Easy to install and connect with the water pipe.
Package including:
- 1 x pump
- 1 x 33' long electric cord (all of our cords are connected with 110V US standard plug)
- 1 x outlet adapter
(Our deep well pump is 220V, the plug is 110V, you can use it with a plug converter)
For using a pressure tank - Max water level VS. pressure switch settings:
- Pressure switch set @ 20/40 psi: 114 feet (max static water level)
- Pressure switch set @ 30/50 psi: 91 feet (max static water level)
- Pressure switch set @ 40/60 psi: 68 feet (max static water level)
- This is a 220V (230V) pump! Make sure your power supply is the same voltage!
Features Technical Specifications:
- 4" deep well submersible pump, 1 HP, 230V, 5.1 Amps, 7 stages, 1-1/4" NPT discharge.
- Fits in a 4" well casing.
- Industrial grade heavy duty, also good for home usage impeller 7 stage design.
- The number of impellers is 8.
- 33 GPM max/257 ft head is comparable to 2HP pumps but uses less electricity.
- 257 feet max head is for open water tanks. Refer to the Pump Selection Guide for the pressure tank applications.
- impeller design provides extended pump life and heavy flow under the worse circumstances.
- This pump lasts much longer than the all-plastic-bottom-suction pump, which weighs half of this pump (same HP).
- Water temperature: (32 ~113 ℉ ) Trans medium's Ph: 6.5~ 8.5
- Shell, motor shafts are made with stainless steel to ensure corrosion resistance. High-quality sealed ball bearings guarantee its excellent performance.
- The hermetically sealed motor has a built-in capacitor start, and thermal protection to prevent overheating, for longer life and a powerful start.
- Built-in the control box. This pump DOES NOT require an external control box!
- This pump uses a high-quality and highly efficient approved motor and uses less energy
- This is a 2-wire pump with 3-Wire (2 wires + ground wire)
- A 10' long electric cord comes with this submersible deep well pump.
- Heavy-duty thermoplastic impellers, diffusers, and intake screens.
- This pump has a built-in check valve.
- Unique design reduces its noise.
- The installation user's manual and tape kit are included.
- Free technical support is available during your installation.
304 Stainless Steel
-
This stainless steel deep well pump features a built-in check valve and stainless steel material. As a result, our pump is highly corrosion-proof and rust-proof.
Powerful Motor
- Pure copper wire click, strong power, safe and durable1
- Copper wire coil,high Efficiency, better heat dissipation
High Precision Rotor
- Stable
- Energy-saving
- Long-life
- High Efficiency
High Lift & Large Flow Rate
- Upgraded Impeller
- High Pressure-resistant
33FT cord
- 33 FT Power Cord
- 2 wire pump with 3-Wire (2 wires + ground wire)
Coupling & Outlet
- Cast iron with electrophoretic paint.
Easy to install and connect with the water pipe.
Package including:
- 1 x pump
- 1 x 33' long electric cord (all of our cords are connected with 110V US standard plug)
- 1 x outlet adapter
(Our deep well pump is 220V, the plug is 110V, you can use it with a plug converter)
For using a pressure tank - Max water level VS. pressure switch settings:
- Pressure switch set @ 20/40 psi: 114 feet (max static water level)
- Pressure switch set @ 30/50 psi: 91 feet (max static water level)
- Pressure switch set @ 40/60 psi: 68 feet (max static water level)
- This is a 220V (230V) pump! Make sure your power supply is the same voltage!