2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
Specifications
- Power:1850W/2.5HP
- Voltage:110V / 60Hz
- Max. Flow:560 L/m
- IP55 INS CL.F: Max. 50 C
- Amps:16A
- Head: Max 18m / 59ft
- Capacitor:25 F
- Inlet:1.5'' Internal
- Outlet:1.5'' Internal
- Pipe Compatibility: Fit 1.5-inch plumbing internally
- Noise Level:<65dB
- Weight: 11 kg /24 lbs
- Power cord length：1.5m/59inch
Features
- Powerful Self-Priming IP55 2.5HP Electric Motor.
- Suitable for pools of up to 100,000 liters.
- Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min.
- Full-Size Removable Strainer Basket.
- 100% Salt and Chlorine compatible.
- Full Commercial Duty - Designed to run 24/7.
- Works with In-ground and Above Ground.
- Built-In Thermal Overload Protection.
- Ideal for Residential/Commercial Swimming Pools & Spa.
How to use
- 1. Locate the pump as close as possible to the pool.
- 2. The pump suction line should not be smaller than the pressure line. All piping must be airtight
- 3. The threads on the pump must be sealed with Teflon Tape or Silicon when the pump unions are screwed on.
- 4. The weight of the piping should be supported independently and not carried by the pump.
- 5. Fill the pump tank with water before starting.
- 6. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump.
- 7. The water being pumped cools and lubricates the seal.
- 8. After the pump tank has been filled with water, and the motor started, allow a few moments for the pump to start delivering water.
Package included
- 1x Pool Pump
- 1x 59inch Power cord w/US plug
- 1x User Manual