1.5HP 110V Swimming Pool Pump Motor 7500GPH Self Primming Above Ground Straine
Specifications
- Power:1100W/1.5HP
- Voltage:110V / 60Hz
- Max. Flow:400 L/m
- IP55 INS CL.F: Max. 50 C
- Head: Max 16m / 52ft
- Amps:10 A
- Capacitor:25 F
- Inlet:1.5'' Internal
- Outlet:1.5'' Internal
- Pipe Compatibility: Fit 1.5-inch plumbing internally
- Noise Level:<65dB
- Weight:9.7 kg /21 lbs
- Power cord length：1.5m/59inch
Features
- Powerful Self-Priming IP55 1.5HP Electric Motor.
- Suitable for pools of up to 7000 liters.
- Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 400L/min.
- Full-Size Removable Strainer Basket.
- 100% Salt and Chlorine compatible.
- Full Commercial Duty - Designed to run 24/7.
- Works with Inground and Above Ground.
- Built-In Thermal Overload Protection.
- Ideal for Residential/Commercial Swimming Pools & Spa.
How to use
- Locate the pump as close as possible to the pool.
- The pump suction line should not be smaller than the pressure line. All piping must be airtight
- The threads on the pump must be sealed with Teflon Tape or Silicon when the pump unions are screwed on.
- The weight of the piping should be supported independently and not carried by the pump.
- Fill the pump tank with water before starting.
- High suction lifts, or long suction lines, require additional time and reduce the performance of the pump.
- The water being pumped cools and lubricates the seal.
- After the pump tank has been filled with water, and the motor started, allow a few moments for the pump to start delivering water.
Package included
- 1x Pool Pump
- 1x 59inch Power cord w/US plug
- 1x User Manual